Ultra-Corr offers the user a pipe that has a seamless uniform cross-sectional wall, radial corrugations that are perpendicular to the axis of the pipe, and a smooth interior for excellent flow characteristics. Ultra-Corr's design enables it to resist earth and impact loads normally associated with sewer and drain pipe installation. The outstanding chemical and corrosion resistance of Ultra-Corr, along with an integral bell and rubber gasket joint, make it an excellent choice for sanitary sewer systems and other drainage applications.

• Easy to Specify with Confidence

  This seamless profile pipe is manufactured in accordance with ASTM F949 and ASTM F794, and meets all the performance requirements of D3034 SDR 35

• Easy to Design

  With a minimum pipe stiffness of 50 psi, the design variables and the embedment requirements are the same as SDR 35

• Easy to Find Allowable Burial Depth

  From one foot to in excess of 100 feet

• Easy to Handle
  A length of 36" pipe weighs 469 lbs
  A length of 30" pipe weighs 338 lbs
  A length of 27" pipe weighs 262 lbs
  A length of 24" pipe weighs 237 lbs
  
  
• Easy to Assemble

  Push together gasketed bell and spigot joint

• Easy to Install

  High strength, light weight, 13' long bottle tight gasketed joints permit much quicker construction than concrete, while providing tighter, longer lasting, and more economical solutions to your interceptor needs

• Easy to Field Cut

  Perpendicular ribs offer a straight edge guide, no spirals or seams to worry about, no belts or multiple measurements required; because the gasket is on the spigot, beveling is not required when a cut is made; there are no channels to fill with a perpendicular rib construction

• Easy to Move Gasket

  When cutting is required, the seamless perpendicular rib construction allows the symmetric gasket to be repositioned between any ribs along the barrel, this also means no wasted pipe

• Easy to Reduce Infiltration

  The 50 gallon/in-diamter/mile/day allowable recommended by the Uni-Bell PVC Pipe Association is no challenge for Ultra-Corr

• Easy to Size Down or Improve Flow in Lines

  Smooth, seamless interior with Manning's n=.009

• Easy to Test

  Tight joints (same as SDR 35 PVC pipe), extra stiffness (8% stiffer than SDR 35), same high impact strength as SDR 35

• Easy to Bury and Forget

  Because it is made of cell class 12454B PVC material, it is resistant to corrosion and a wide range of chemicals. These PVC materials have been in the ground for over 50 years and have demonstrated like new material performance after decades

• Easy to Justify

  Higher strength to weight ratio results in more strength and better economics than conventional PVC; Bottle tight joints and superior long term performance make it far more economical than concrete